Kleenmaid LWK23 Version 38903R6 - Manual (Page 29)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
27 38903
Easy Steps to Saving Water
Kleenmaid Water Conservation Tips
At Kleenmaid we work hard at ensuring our products
use as little as possible of the world’s natural
resources. Our energy ratings for many of our products
are amongst the best available. Our washing machines
are no exception to this philosophy being the most
economical user of water in the greater than 7kg
capacity washers in the market.
For our valued customers, who are conscious of water
reuse or who live in areas where water can become
scarce, we have the following hints for further water
preservation.
How to Save Suds on Normal Cycle
1. Place outlet hose in the laundry tub. Make sure
the plug is in.
2. Select washing programme, then pull control
knob out. Allow machine to go through wash
portion of programme. (Cannot be used on
Permanent Press or Delicate Cycles.)
3. As wash water drains, the laundry tub will nearly
fill with the wash water, turn the washing
machine off. Place outlet hose in the laundry tub
by-pass hole or a similar drain hole to remove
excess water.
How to Return Suds
1. Ensure tip of the outlet hose remains at the base
of the laundry tub.
2. Select washing programme, then pull control
knob out and allow washing machine to fill for
30 seconds.
3. Turn the timer to spin location, pull control knob
out to start machine for a few seconds and then
push knob in to stop. This will start the machine
to siphon the water from the laundry tub, back
through outlet hose into the washing machine.
4. Once an equilibrium has been reached, the water
will stop siphoning back into the washing
machine.
NOTE: Return the outlet hose to the by-pass unless
you want to save water again.
5. Turn timer to wash cycle to fill with additional
water and commence next wash programme.
How to Save Rinse Water for the Garden
1. Place outlet hose in laundry tub by-pass.
2. Select washing programme, then pull control
knob out.
3. To use rinse water, stop machine before final
drain, insert outlet hose into a tube which has a
diameter larger than the outlet hose (32 mm or
greater of clear/flexible PVC tubing*). Continue
cycle and drain water out to garden.
* If you want to create an air tight connection, you
should purchase a Siphon Break Kit form Kleenmaid
Spare Parts – Part #KS562P3, which prevents
siphoning.
How to Obtain Additional Information
If you would like further information in relation to
your water saving needs and the above hints, please do
not hesitate to contact one of our Customer Service
Consultants on 1300 652 100.
Figure 12
W178I
1 Tie-Down Strap (Tape if necessary)
1