Kleenmaid LTKA6 - Manual (Page 22)

Washer Operation
802726 20 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
To Wash Clothes
IMPORTANT: Before using your new washer,
make sure the washer cord is plugged into a
240 Volt electrical outlet that has the proper
earthing and polarity. Make sure the washer hoses
are connected to the hot and cold water faucets,
and that the faucets are turned on. Be sure the
drain hose is not kinked and is inserted into a
drain. Refer to the INSTALLATION
INSTRUCTIONS for details of proper washer
installation.
IMPORTANT: Prior to first wash, use an all-
purpose cleaner, or a detergent and water solution,
and a damp cloth to remove shipping dust from
inside of washtub.
IMPORTANT: Remove all sharp objects from
laundry to avoid tears and rips to items during
normal machine operation.
1. Get the clothes ready for washing. Empty pockets
and cuffs. Sort items into separate loads. Pretreat
stains and heavily soiled areas.
Figure 6
2. Measure and add low sudsing detergent, fabric
softener, and bleach to the dispenser drawer.
Refer to section on Using Your Dispenser
Drawer.
Figure 7
IMPORTANT: If using detergents made for
topload washers, avoid oversudsing by using only
1/4 cup regular detergent (1/2 of the recommended
amount).
3. Load clothes into wash drum (8.1 kg maximum
dry clothes load). Refer to section on Load Sizes.
Figure 8
4. Close the loading door tightly. The washer will
not operate with the loading door open.
Figure 9
5. Set WASH/RINSE temperatures.
Figure 10
D305I
SWD873N
SWD874N
SWD875N
DRY2069N
To reduce the risk of serious injury, do not
bypass the loading door switch by
permitting the washer to tumble or spin with
the loading door open.
W095
WARNING