Icom IC-M73 Plus - Manual (Page 24)

16
New2001
DUALWATCH/TRI-WATCH
6
■
Description
Dualwatch monitors Channel 16 while you are receiving
on another channel; Tri-watch* monitors Channel 16 and
the call channel while receiving on another channel.
* For the Dutch transceiver version
Only Dualwatch can be used.
■
Operation
q Select a desired operating channel.
w Hold down [SCAN•DUAL] for 1 second to start
Dualwatch or Tri-watch (depending on the SET mode
setting; p. 27) .
• “DUAL” blinks during Dualwatch; “TRI” blinks during Tri-watch.
• A beep tone sounds when a signal is received on Channel 16.
• Tri-watch becomes Dualwatch when receiving a signal on the
Call channel.
e To cancel Dualwatch/Tri-watch, push [SCAN•DUAL] again.
DUALWATCH/TRI-WATCH SIMULATION
Dualwatch Tri-watch
Call
channel
Ch 88 Ch 16 Ch 88 Ch 16 Ch 88 Ch 9
• If a signal is received on Channel 16, Dualwatch/Tri-
watch pauses on Channel 16 until the signal disappears.
• If a signal is received on the Call channel during Tri-
watch, Tri-watch becomes Dualwatch until the signal
disappears.
• To transmit on the selected channel during Dualwatch/
Tri-watch, hold down [PTT].
[Example]: Operating tri-watch on INT channel 07.
A signal is received
on the Call channel.
A signal received on
Channel 16 always
takes priority. Tri-watch resumes
after the signal
disappears.
Tri-watch starts.
Hold down for 1 second