Hytera TC-580 - Manual (Page 43)

7
Troubleshooting
You can not communi-
cate with other members.
The frequency or signaling may be in-
consistent with that of other members. Set your frequency and signaling to the same
as that of other members.
You may be too far away from the
group members. Move towards other members. And make sure
that you are within the communication range.
Irrelevant communication
activities or noises are
heard on the channel.
You may be interrupted by radios using
the same frequency. Change the frequency, or adjust the squelch
level.
The radio may be set with no signaling.
Set signaling for all member radios to avoid
interference at the same frequency.
The noise is too loud.
You may be too far away from other
members. Move towards other members, power off your
radio and then restart it.
You may be at an unfavorable position.
For example, your communication may
be blocked by high buildings or frustrat-
ed in the underground areas.
Move to an open and flat area, and restart the
radio.
You may suffer from external distur-
bance (such as electromagnetic inter-
ference).
Stay away from equipment that may cause
interference.
If the above solutions can not fix your problems, or you may have some other queries, please contact us or your local
dealer for more technical support.