La Crosse Technology WS-9031U - Manual (Page 24)

2. Use the CH/+ key to view all levels of contrast.
3. Select the desired LCD contrast. Confirm with the SET key and enter in
the Time Zone setting.
TIME ZONE SETTING:
The time zone default of the Weather Projection Station is EST –5. To set a
different time zone:
1.
The current time zone value starts flashing.
2. Use the CH/+ key to set the time zone. The range runs from 0 to -12
and then runs from +12 back to 0 in consecutive 1-hour intervals. The
LCD also displays U.S. time zone map available for –5hr(EST), -
6hr(CST), -7hr(MST) and –8hr(PST) zones.
3. Confirm with the SET key and enter the DST (Daylight Saving Time)
setting.
Flashing
U.S. Time
zone map