La Crosse Technology WS-9215 - Manual (Page 19)

19
To wall mount
Before wall mounting, please check that the outdoor temperature value can be received from the
desired locations.
1.
Fix a screw (not supplied) into the desired wall, leaving the head extended out by about
5mm.
2. Remove the stand from the weather station by pulling it away from the base and hang the
station onto the screw. Remember to ensure that it locks into place before releasing.
POSITIONING THE TEMPERATURE TRANSMITTER:
Choose a sheltered place. Avoid direct rain or sunshine.
The transmitter is supplied with a holder that may be attached to a wall with the two screws supplied.
The transmitter can also be position on a flat surface by securing the stand to the bottom of the
transmitter.