La Crosse Technology WS-9257U-IT User Manual
Page 3
3
The outdoor thermo-hygro transmitter
Remote transmission of outdoor temperature and humidity to weather station
by 915 MHz
Alternately display the outdoor temperature and humidity on LCD
Wall mounting case
Mounting at a sheltered place. Avoid direct rain and sunshine
INITIAL SET UP
DO NOT MIX OLD AND NEW BATTERIES.
DO NOT MIX ALKALINE, STANDARD, OR RECHARGEABLE BATTERIES
1.
Insert the batteries into the Temperature transmitter. Keep the transmitter 5-10 feet
from the Weather Station during set up.
2.
Within 45 seconds, insert batteries into the Weather Station. Once the batteries are
in place all segments will light up briefly. The time will be displayed as 12:00. If this
is not displayed within 80 seconds, remove the batteries from both units for 2
minutes and start again from step 1.
3.
The weather station will start receiving data from the transmitter. The outdoor
temperature and signal reception icon will be displayed. If this is not displayed