La Crosse Technology WS-9257U-IT - Manual (Page 5)

5
HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The weather station uses 2 x C, IEC LR14, 1.5V batteries. To
install and replace the batteries, please follow the steps
below:
1. Remove the cover at the back of the weather station.
2. Insert batteries, observing the correct polarity (see
marking).
3. Replace the compartment cover.
Note: Always wait for 2 minutes after removing the batteries before reinserting, otherwise start
up and transmission problems may occur. In the event of changing batteries in any of the units, all
units need to be reset by following the setting up procedures.
BATTERY CHANGE
It is recommended to replace the batteries in all units regularly to ensure optimum
accuracy of these units (Battery life See Specifications below).
Please participate in the preservation of the environment. Return used
batteries to an authorized depot.
FUNCTION KEYS
Weather station:
The weather station has five easy to use function keys: