Replacement of the ceramic cartridges – Lacava W1026 User Manual
Page 5
Advertising
LACAVA LLC
®
Page 5 of 10
Replacement of the Ceramic Cartridges
1. Close the inlet piping lines.
2. Remove the escutcheon ring (1), which is held in place with a rubber washer,
black rubber gasket (2), and a plastic ring.
3. Remove the control lever (4) and unscrew the brass ring (5) with the provided
key.
4. Remove the cartridge (6) from its housing and replace with the new cartridge
(part #R058).
5. Reassemble by reversing steps 2-3.
6. Open the inlet piping lines and check for any leaks.
Advertising