LD Systems MAUI 11 MIX W - Manual (Page 9)

1 MIC INPUT
Balanced microphone input (XLR/ 6.3 mm jack combo) It is also possible to use an unbalanced microphone
cable (mono jack). The microphone input has a built-in 100 Hz subsonic filter to suppress low-frequency noise.
NOTE: There is no phantom power on the microphone input.
2 HI-Z INPUT
Mono input with 6.3 mm jack socket for acoustic or electric guitar. Both inputs HI-Z and MP3 can be used
simultaneously; the volume ratio must be set on the instrument, or on the player.
3 MP3 INPUT
Stereo line input with 3.5 mm jack socket for an MP3 player or other playback device. The audio signal is fed
from the MIX OUTPUT LEFT / RIGHT in stereo, and is mono summed internally. Both inputs HI-Z and MP3 can
be used simultaneously; the volume ratio must be set on the instrument, or on the player.
4 LINE INPUT LEFT / RIGHT (RCA)
Unbalanced line input with RCA socket (left / right) for connecting an external audio source (e.g., laptop, CD
player). The audio signal is fed from the MIX OUTPUT LEFT / RIGHT in stereo, and is mono summed internally.
5 LINE INPUT LEFT / RIGHT (XLR)
Balanced line input (XLR / 6.3 mm TRS combo, left / right) for connecting an external audio source (e.g.,
mixer, keyboard). The audio signal is fed from the MIX OUTPUT LEFT / RIGHT in stereo, and is mono summed
internally.
6 MIX OUTPUT LEFT / RIGHT
This balanced stereo XLR output is independent of the main level and provides the mix signal from the
microphone, HI-Z / MP3, and line input signals.
7 POWER
Illuminated On / Off switch for the power supply of the device. Before switching the active speaker on or off,
always adjust the volume to zero (MAIN LEVEL all the way to the left).
CONNECTIONS, CONTROLS, AND INDICATORS:
9
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
DEUTSCH
ENGLISH
9 10 11 12 13
14