LD Systems LAX 3 USB - Manual (Page 10)

connectionS, CONtROLS, AND INDICAtORS:
18 CD / tAPE IN tO MAIN
If this button is pressed, the signal present on CD / TAPE IN is sent directly to the main stereo
output. The signals from Channel 1 and 2/3 are not interrupted.
19 CD / tAPE IN tO PhONES / CONtROL ROOM
If this button is pressed, the signal present on CD / TAPE IN is sent directly to the stereo PHONES
/ CONTROL ROOM output. The signals from Channel 1 and 2/3 are muted. The volume of this
output is control via the volume control for PHONES / CONTROL ROOM (16) and, in this case, is
independent of the main mix control (14, MAIN MIX).
Note: The analogue/digital converter is parallel to MAIN OUT and TAPE/CD OUT in the signal path. This
means that the main stereo output signal of the mixer is sent to the recording software used.
10
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ES
pA
ño
L
po
LSKI
IT
ALIAN
o