Installation & mounting – LD Systems DDQ 15 User Manual

Page 12

Advertising
background image

12

ENGLISH

DEUTSCH

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

ESP

AÑOL

POLSKI

IT

ALIANO

INSTALLATION & MOUNTING:

FLOWN OPERATION:
The speaker is equipped with appropriate flyware for flown operation.
The LDDDQ15 has M10 threads for use with M10 eyelet bolts, which can be used to suspend the speakers on
chains with snap hooks or on wire ropes.
As an alternative to flying points, the speaker can be flown using the LDDDQ15SB swing bracket developed
especially for use with the LDDDQ15 speaker. The assembly instructions can be found on the following pages of
this user's manual.
Please use only appropriately certified, undamaged flyware (flying points, eyelet bolts, snap hooks, chains, wire
ropes, etc.). The speaker must be additionally secured against falling using suitable and appropriately dimensioned
chains and/or steel cables. Please also observe the requirements with regard to installation personnel. Mounting
on crossbars, ceilings, walls, etc. should be carried out only by appropriately trained personnel. Please observe the
applicable regulations (which vary from country to country)!

MAINTENANCE:
The best way to clean the surface of the speaker cabinet is to use a dry, medium-hard brush (for example, a
wallpaper brush). Use only a dry cloth to clean the control panel.

Advertising
This manual is related to the following products: