LD Systems WS 1000 G2 - Manual (Page 11)

11
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
DEUTSCH
ENGLISH
HANDHELD MICROPHONE:
1 MICROPHONE HEAD
2 BACKLIT LCD
Displays group, channel and a 4 segment battery
status indicator. If the battery symbol blinks, the
batteries need to be replaced immediately.
NOTE: Backlight will turn off automatically after a
brief moment.
3 ON / OFF SWITCH
4 GAIN CONTROL
Handle carefully! Use only suitable screwdriver!
Turn left to decrease gain, turn right to increase
gain.
5 BATTERY COMPARTMENT
To replace batteries, unscrew cover counter-
clockwise, remove batteries, insert 2 new AA size
batterries (direction as shown in the compart-
ment) and screw the cover onto the handheld
microphone clockwise.
6 IR INFRARED INTERFACE
Located on the bottom side of the handheld
microphone.
For frequency synchronisation push the ASC but-
ton on the receiver (the ASC symbol in the display
blinks), switch on the transmitter and hold it with
its infrared interface facing direct to the infrared
interface of the receiver in a distance between 5
and 20 cm (within 10 seconds after switching the
transmitter on).
2
1
3
5
6
4
5