LD Systems WS 1G8 - Manual (Page 14)

14
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ES
pA
ño
L
po
LSKI
IT
ALIAN
o
SYSTEM SETTINGS:
ASC (frequency synchronisation via infrared)
The transmission frequency of a wireless system has to be the same in both transmitter and receiver.
Once a specific frequency (group and channel) has been selected, the transmitter (handheld or bodypack) has to
be synchronized to the same frequency (group and channel) via the ASC function.
Push the ASC button
1 on the receiver (the ASC symbol in the display blinks) and hold the (switched on) trans-
mitter with its infrared interface 2 facing direct to the infrared interface of the receiver in a distance between
5 and 20 cm. After a short moment the synchronisation process is done and the RF signal level meter 3 of the
receiver indicates a signal.
1
2
2
3
LOw BATT (low batteries)
If the „LOW BATT“ indicator blinks in the receiver display, the batteries in the transmitter must be replaced immediately..