Legrand OR-205KAN9GB-MM - Manual (Page 48)

Installation on jacketed fiber
Page 41 OptiMo Connector Installation Instructions
17 mm
8
a For 2.0 mm to smaller than 2.4 mm cord
8
b For 2.4 mm to 3.0 mm cord
6 mm
15 mm
4 mm
Make sure all the slack fiber is pushed back inside the
jacket. First mark the buffer at the end of the jacket.
Mark it again at 6 mm and 17 mm.
Make sure all the slack fiber is pushed back inside the
jacket. Insert the cord adapter as shown. First mark
the buffer at the end of the cord adapter. Mark it again
at 4 mm and 15 mm.
SC
SC