Legrand OR-205KAN9GB-MM User Manual
Page 71
Advertising
Cleaning procedures
OR-71601671
Page 64
1. Wipe completely around the connector ferrule a few times with a lint-free alcohol soaked wipe. Then wipe
across the end of the ferrule.
2. Repeat step 1 with a dry wipe.
3. Blow compressed gas across the end of the ferrule (optional but recommended).
*
Do not allow ferrule to touch anything before inserting into coupling.
*
Preferred alcohol is ethanol but isopropyl alcohol may be used.
*
A dry cleaning tape system may also be used.
Advertising
This manual is related to the following products: