Legrand 895 Series Floor Box Covers v.1 - Manual (Page 2)

© Copyright 2005 Wiremold / Legrand All Rights Reserved
NOTE: Keep screw plugs for
future abandonment.
880 Series Floor Box Applications:
Step 1 Remove the mud cap and
adjust the floor plate to be
1/8
" [3.2mm] below the final
floor finish.
Step 2 Place the gasket over the floor
plate and attach the cover using
(3) #8 flat head screws.
Step 3 Remove the center screw
plug and pull cables through
the opening.
Cat. No. 896CK
(Shown)
Step 1 Remove any plaster ears before wiring and attaching
the receptacle.
Cover Attachment:
Step 2 Place the gasket support plate over the receptacle and
attach with #6 round head screw.
Step 3 Place Gasket over the gasket support plate. Step 4 Attach cover with (3) #8 flat head screws. Complete
installation by pushing the box assembly into the
hole until seated firmly against the floor finish.
Cat. No. 895T
(Shown)
860 Series Floor Box Applications:
Wiremold / Legrand
U.S. and International:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251
Canada:
570 Applewood Crescent • Vaughan, Ontario L4K 4B4
1-800-723-5175 • FAX 905-738-9721
1 003 789 R1 – Updated August 2005 – For latest specs visit www.wiremold.com