Leprecon LPC Quick Start guide RevF - Manual (Page 11)

11
5. Submasters
5.1. Recording Submasters
Selecting Record and Submaster tabs brings up the Submaster Record screen.
The screen shows submaster properties at the top of the screen, and channel levels at
the bottom.
Channel levels shown are the actual LPC output, so previously recorded submasters can
be used to build new looks.
5.1.1. Moving about the screen
Left and right arrow keys are used to 'tab' from field to field.
Adjust the levels within a field with up and down arrows, or use the keypad to enter a
new value.
5.1.2. Submaster Properties
The Submaster record screen is used to record channel levels, as well as all other
properties.