Longines DolceVita - Manual (Page 15)

Adjusting the clasp Closing the clasp
Opening the clasp
1. Release the adjusting mech-
anism by removing the pin from
the hole in the long section of
the strap.
2. Slide the mechanism along
this long section and then fix
it by reinserting the pin in the
desired hole.
3. To open the clasp press in
the push-pieces on either side
simultaneously.
4. Open the clasp to enlarge
the bracelet and remove the
watch from your wrist.
5. Put the bracelet on your
wrist and slide the long section
through the small fixed buckle.
6. Close the folding clasp until it
clicks into place. If necessary,
slide the long section through
the small mobile buckle.
DEPLOYMENT BUCKLE 55