L633-diver – Longines DolceVita User Manual
Page 25
65
Your Longines Legend Diver Watch has 2 crowns,
A
and
DIVER
, which can be used for specific func-
tions (fig.
ቢ
).
Shows the hours, minutes, seconds and date and
also enables the user to check his or her diving time.
Crown
A
: 3 positions
Adjusting the time and stop seconds
Unscrew crown
A
and pull it out to position 3. The
seconds hand will now stop. Adjust the time by turning
the crown in either direction. Synchronise your watch
with a time signal (telephone, radio, TV) and then push
the crown
A
back in to position 1, and screw in firmly.
Adjusting the date
Unscrew crown
A
and pull it out to the intermediate
position 2. Turn it forwards until it shows the desired
date. Push crown
A
back in to position 1 and screw
in firmly.
DIVER
screw-in crown
Verifying your diving time
Unscrew the
DIVER
crown. When you start diving turn
the rotating bidirectional ring to adjust the needle to the
minute hand. Push the crown back in again and then
screw in firmly (fig.
ባ
).
You can read off your diving time from the minute hand
on the graduations of the rotating bidirectional ring
(fig.
ቤ
). The example shows: 15 minutes diving time.
DIVER
R
DIVER
L633-Diver
Date
Hour hand
Bi-directional rotating
flange
Minute hand
Stop/start crown for
the bi-directional
rotating flange
3-position
crown
Date aperture
Seconds hand
1
2
3
ባ
ቢ
ቤ
A
Automatic watches L633 Diver-Date