Louroe Electronics MS-1 - Manual (Page 3)

A B C
A B C
V E R I FA C T A
M I C R O P H O N E
L
N
MS-1
Mute Switch
A B C
TERMINAL
BLOCK OF
VERIFACT A
MICROPHONE
Gain adjust switch
(factory set)
Terminal Block of
Louroe Base Station
or
Audio Interface Adapter
All Louroe microphones
are compatible with the MS-1
Model Verifact A is shown
as an example
2 Conductor shielded cable, 22
gauge with a 24 gauge drain wire
NOTE: Unshielded cable is not
satisfactory for audio systems
WIRING REQUIREMENTS
West Penn 452 or equivalent
INTERCONNECTION DIAGRAM
FOR
MS-1 MUTE SWITCH,
LOUROE MICROPHONE
AND
LOUROE AUDIO BASE STATION OR
AUDIO INTERFACE ADAPTER
A B C
WIRE NUT
Refer to Louroe Base Station
or
Audio Interface Adapter
Installation and operating
instructions
www.louroe.com
Page 3 of 8
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX 994-6458
website: www.louroe.com e-mail: [email protected]
(818) ®
INSTALLATION AND OPERATING INSTRUCTIONS
ms_1_inst_3/15