D-Link DIR-615 - Manual (Page 52)

5 D-Link DIR-615 User Manual
Section 3 - Configuration
Enter a new password for the Administrator Login
Name. The administrator can make changes to
the settings.
Enter the new password for the User login. If you
login as the User, you can only see the settings,
but cannot change them.
Enter a name for the DIR-615 router.
Remote management allows the DIR-615 to be
configured from the Internet by a web browser.
A username and password is still required
to access the Web-Management interface.
In general, only a member of your network
can browse the built-in web pages to perform
Administrator tasks. This feature enables you
to perform Administrator tasks from the remote
(Internet) host.
The port number used to access the DIR-615.
Example: http://x.x.x.x:8080 whereas x.x.x.x
is the Internet IP address of the DIR-615 and
8080 is the port used for the Web Management
interface.
This section will list any rules that are created.
You may click the Edit icon to change the
settings or enable/disable the rule, or click the
Admin Password:
User Password:
Gateway Name:
Remote
Management:
Remote Admin
Port:
Inbound Filter:
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.
There are two accounts that can access the management interface through the web browser. The accounts are admin
and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot
make any changes. Only the admin account has the ability to change both admin and user account passwords.