Lynx Studio LynxTWO/Aurora Interface Kit - Manual

Interface Kit
User Manual
The LynxTWO/Aurora Interface Kit requires your Aurora converter to have Firmware Version 13 or later. Any
Aurora shipped from Lynx Studio Technology prior to December 12, 2005 will have previous firmware
installed in it.
THE LYNXTWO/AURORA INTERFACE KIT WILL NOT WORK IN ANY AURORA SHIPPED PRIOR
TO DECEMBER 12, 2005 UNTIL THE AURORA'S FIRMWARE IS UPDATED TO VERSION 13 OR
LATER.
Updating the Aurora firmware is a simple procedure using the AES16. Full instructions are on our website at:
http://www.lynxstudio.com/aurorafirmwareupdate.html . Once your unit has been programmed with Firmware
Version 13, you can program firmware updates in the future via MIDI or Infrared.
If your unit needs to be updated, and you do not have access to an AES16, there are two options for customers
within the USA and Canada:
Option 1: Send the Aurora to Lynx Studio Technology in California. We will update the Aurora, do a full
diagnostic test, and ship the unit back within 24 hours of receipt via 2-Day Air.
Option 2: Lynx Studio Technology will loan you an AES16 for updating the firmware in your Aurora. For more
information on the procedure and any questions, contact
[email protected] or call 949-515-8265 ext
206.
If you are outside of the USA or Canada, please contact your local distributor for additional firmware update
options.
Lynx Studio Technology, Inc.
www.lynxstudio.com
[email protected]