Marantz SA-KI PEARL - Manual (Page 25)

19
NAMES AND FUNCTIONS
BASIC CONNECTIONS
BASIC OPERA
TION
ADV
ANCED CONNECTIONS
APPLICA
TION OPERA
TION
TROUBLESHOOTING
OTHERS
APPLICA
TION OPERA
TION
ENGLISH
.
TO CHECK THE PROGRAMMED
TRACKS
CLEAR
¶
To Delete a Programmed Track
1.
Press CLEAR button in stop mode when program has
been made (When “PROG” indicator is lighting up).
2.
Every time press CLEAR button, the programmed tracks
are deleted in order from the last track programmed.
¶
To Clear Whole Program
Press 7 STOP button two times while in program play.
In the stop mode, press 7 STOP button once.
Program can also be cleared by pressing 0 OPEN/CLOSE
button to open the disc tray.
To Add Tracks to Program
Tracks can be added to the end of program when program
is remaining (“PROG” indicator is lighting up) and in stop
mode.
¶
Please be careful about the following matters
• When programming 1st through 9th tracks in a disc that
has over 10 tracks by using numeric buttons. For instance,
programming the 3rd track after programming the 1st track,
press 3 button more than approximately 1.5 seconds after
1 button is pressed. When a program is finalized, the time
is updated.
• Likewise, when programming a track at 10th or after. For
example, to program 13th track, press 3 button within
approximately 1.5 seconds after 1 button is pressed.
• When programming a track in a disc that has less than
9 tracks. For instance, to program the 5th track after 4th
track has been programmed, press 5 button more than
approximately 0.5 second after 4 button is pressed.
SEARCHING YOUR FAVORITE TRACKS
(AMS (AUTOMATIC MUSIC SCAN) PLAY)
AMS
This feature is convenient for searching where your favorite
track is.
If the AMS button is pressed while a track is stopped, the AMS
indicator “AMS” lights up, and the first ten seconds of each track
on the disc will be played starting from the first track.
Also, if the AMS button is pressed during playback, the AMS
indicator “AMS” lights up, and the program jumps to the next
track after approximately 10 seconds elapses on the display
time.
Once you find a song that you want to listen to, press the
AMS button again or press the
2 button. The AMS indicator
“AMS” turns off, and normal playback resumes from the
current track.
Note:
AMS Play cannot be conducted while the unit is in PROGRAM
mode.
APPLICATION OPERATION
SA-KI PEARL_UN_01_Eng.indd 19 SA-KI PEARL_UN_01_Eng.indd 19 09.2.23 9:49:28 AM 09.2.23 9:49:28 AM