Marantz SA8005 - Manual (Page 45)

45
Appendix Tips Settings Connections Contents
Front panel Display Rear panel Index Remote
Playback
2 Installing the dedicated driver (Windows OS only)
n Installing the driver software
1 Disconnect the USB cable between your computer and
the unit.
• The driver software cannot be installed correctly if your computer
is connected to the unit by a USB cable.
• If the unit and your computer are connected by a USB cable and
the computer is switched on before installation, disconnect the
USB and restart the computer.
2 Download the dedicated driver from the “Download”
section of the SA8005 page of the Marantz website
onto your computer.
3 Unzip the downloaded file, select the 32-bit or 64-bit
exe file that matches your Windows operating system,
and double-click the file.
Connecting and playing back from a
computer (USB-DAC)
• You can enjoy high-quality audio playback from the D/A converter built
in to this unit by inputting PCM signal or DSD signal music files into this
unit from a computer via USB connection.
• In order to use USB-DAC playback, install the dedicated driver onto your
computer to enable your computer and this unit to communicate.
• Drivers do not need to be installed for Mac OS.
• Also, you can use whichever commercially available or downloadable
player software you like to playback files on your computer.
2 Computer (recommended system)
OS
• Windows® XP Service Pack3, Windows® Vista, Windows 7 or Windows 8
• Mac OS X 10.6.3 or later.
USB
• USB 2.0: USB High speed/USB Audio Class Ver.2.0