Changing the tv settings, Picture size – Dynex DX-LTDVD22-09 User Manual

Page 20

Advertising
background image

20

Changing the TV settings

3 Press or to select Picture Size, then press or ENTER. The

Picture Size menu opens.

4 Press or , or the corresponding number buttons, to select

the picture size you want. Options include:

Natural—In some cases, this image displays the size of

standard 4:3 with a black side bar.

Cinema Wide1 (for 4:3 format programs)—To fill the

screen, the right and left edges are extended. However the
center of the picture remains near its former ratio. The top
and bottom edges of the picture may be hidden.

Cinema Wide2 (for 4:3 format programs) The top and

bottom edges of the picture may be hidden.

Cinema Wide3 picture size (for letterbox programs with

subtitles)—To fill the width of the screen, it is extended
horizontally. However it is only slightly extended at the top
and the bottom. The top and bottom edges of the picture
may be hidden.

Full picture size (for 16:9 source programs)—Displays the

picture at the maximum size.

5 After choosing the picture size you want, press EXIT to return to

normal viewing.

Notes:
Selectable picture sizes may vary, depending on the input source or

broadcast signal.

The Picture Size menu can also be opened by pressing ZOOM on the

remote control.

Some high definition and/or digital broadcasts may not let you change

the picture size.

In HDMI or COMPONENT mode, with a scanning rate of 720p or 1080i, only

the Cinema Wide2 and Full sizes are available.

In PC Mode, only the Natural and Full picture sizes are available.

Additionally, this feature does not work when display mode is WXGA.

To set the film mode:

1 Press SETUP/TV MENU. The initial on-screen menu opens.

2 Press

or

to

select

Picture, then press or ENTER. The

Picture menu opens.

3 Press

or

to

select

Film Mode, then press or to select

On or Off.

Note: For smoother motion, set the Film Mode to On when you view a

DVD.

4 After choosing the setting you want, press EXIT to return to

normal viewing.

Picture Size

1.Cinema Wide1

2.Cinema Wide2

[0-4]:Select

0.Natural

4.Full

3.Cinema Wide3

A B C D E F G - - - - - - - - - - - - - - - -

A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -

Main Menu

ENTER : Set

: Select

>>

Picture

Audio

Channel

Lock

Setup

DNR On

Picture

Picture Setting >>

PC Setting >>

Picture Preference

Dynamic

Picture Size >>

Film Mode On

: Adjust

: Select

Advertising