Dynex DX-LTDVD22-09 - Manual (Page 29)

Using the DVD player 29
3 Press or to select the Parental, then press or ENTER.
The Enter Password screen opens.
4 Enter “0000” using the number buttons (0-9), this is the preset
password, then press ENTER. The parental level list opens. If you
enter a wrong number, press EXIT and try again.
5 Press or to select the setting you want, then press ENTER.
Available options include:
• Level Off—No control.
• Level 8—Virtually all DVDs can be played back.
• Level 1—The most restrictive setting.
The limitation is more restrictive as the level number decreases.
6 Press SETUP/TV MENU to close the menu screen.
Notes:
The level of dynamic range reduction may differ, depending on the DVD.
Depending on the disc, the unit may not be able to limit playback.
Some discs may not be encoded with specific rating level information,
even though the disc jacket says “adult.” For those discs, the age
restriction does not work.
After the rating is locked, the setting cannot be changed unless you enter
the correct password.
To set a new password:
1 Press SETUP/TV MENU in stop mode or with no disc inserted.
The DVD menu opens.
2 Press or to select the Parental icon , then press or
or ENTER. The Parental Control menu opens.
3 Press or to select the Password, then press or ENTER.
The Enter Current Password screen opens.
4 Enter your password using the number buttons (0-9), then press
ENTER. The Enter New Password screen opens. If you enter a
wrong number, press EXIT and try again.
5 Enter your new password using the number buttons (0-9), then
press ENTER. Your new password has been set.
Note: Do not forget your new password. Write it down in a convenient
place. If you forget the password, contact Customer Service. The
original remote control will be required.
Temporarily disabling the rating level
Some pre-recorded DVDs may attempt to temporarily cancel the rating
level that you have set. You are given the option to allow or not allow
the override.
To temporarily disable the rating level:
1 Load a DVD. If the DVD has been designed to temporarily cancel
the rating level, an option screen opens. Press ENTER to select
YES to override the rating, or
NO to accept the rating.
2 If you select YES, an Enter Password screen opens.
3 Enter your password using the number buttons (0-9), then press
ENTER. Playback begins if you enter the correct password.
Note: This temporary cancellation of the rating level is retained until the
disc is ejected, at which time the original rating level will be set again
automatically.
Playing MP3, WMA, JPEG and audio CD
discs
This player can play back MP3, WMA, and JPEG data which has been
recorded on CD-R or CD-RW discs. To produce MP3, WMA, and JPEG
discs, you need a Windows computer with CD burner and MP3/WMA/
JPEG encoding software (not supplied). The Apple-HFS-System discs
cannot be played.
MP3/WMA/JPEG CD disc information
Limitations on MP3/WMA/JPEG CD playback
• MP3/WMA/JPEG CDs are standardized by ISO9660. File names
must include the three-digit extension letters “MP3”, “WMA”, or
“JPEG”.
• The directory and file names of MP3/WMA/JPEG CDs must
correspond to ISO standardized files.
• This player can read 2000 files per disc. If one folder has more
than 2000 files, it reads up to 2000 files. The remaining files are
omitted.
• If a CD has both audio tracks and MP3/WMA/JPEG files, only
audio tracks are played.
• It may take more than one minute for this player to read
MP3/WMA/JPEG files, depending on the disc structure.
Parental : Off
Password : Change Enter Password
Parental : Off
Password : Change
Parental : Off
Password : Change
Enter Current Password
Parental : Off
Password : Change
Enter New Password
Enter Password