Marantz DV-17 - Manual (Page 11)

11
MAKING CONNECTIONS
ENGLISH
Audio Connections
This player features two digital (optical and coaxial) and also
analog audio output formats.
Digital Audio Connections:
You can enjoy the digital audio recorded on DVD discs from
both optical digital and coaxial digital output jacks.
When making digital audio connections, do not make
connections from both the coaxial and optical digital
outputs to the same component.
When a DVD recorded in Dolby Digital, DTS, or MPEG is
loaded, noise will be output if you have made connections via
the digital audio jacks to a receiver or amplifier that cannot
decode a Dolby Digital, DTS, or MPEG digital bitstream. In
this case, be sure to set up the Setup Navigator audio
settings to best reflect the type of system you are using (
page
16 ). Additionally, the digital audio settings can be adjusted
manually in the Setup screen Audio 1 menu ( page 23-24 ).
DIGITAL OUT (Optical)
The digital signal is transmitted as light pulses through a
fiber-optic cable.
• Use to connect to an AV amplifier or receiver with built-in
Dolby Digital, DTS, or MPEG decoder.
• Use a fiber-optic cable (not supplied) to connect the
DIGITAL OUT OPT (digital optical output) on the player to
the digital optical input on an AV amplifier or receiver.
DIGITAL OUT (Coaxial)
The digital signal is transmitted electronically through a
coaxial cable.
• Use to connect to an AV amplifier or receiver with built-in
Dolby Digital, DTS, or MPEG decoder.
• Use a coaxial cable (not supplied) to connect the DIGITAL
OUT (coaxial digital output) on the player to the coaxial
digital input on an AV amplifier or receiver.
AV amplifier or receiver with
built-in Dolby Digital, DTS, or
MPEG decoder
Analog Audio Connection:
AUDIO OUT
• Make analog audio connections to a stereo amplifier or
receiver.
• Analog audio connections can also be made to a TV or
monitor with stereo input jacks.
• Use the supplied audio cord to connect the AUDIO OUT
on the player to the audio input on the stereo amplifier or
receiver.
• When making analog audio connections, be sure to match
the color of the plugs with the color of the jacks (red and
white).
Stereo amplifier or receiver
AV amplifier or receiver with
built-in Dolby Digital, DTS, or
MPEG decoder
AUX
A/V EUROCONNECTOR TV OUTPUT VIDEO OUTPUT AUDIO S2 1 2 VIDEO
2
L 1
R
COAXIAL OPTICAL
OUTPUT DIGITAL EXTERNAL INTERNAL
CONTROL REMOTE
IN
OUT
PAL
SYSTEM TV AUTO NTSC
DIGITAL IN
OPTICAL
AUX
A/V EUROCONNECTOR TV OUTPUT VIDEO OUTPUT AUDIO S2 1 2 VIDEO
2
L 1
R
COAXIAL OPTICAL
OUTPUT DIGITAL
EXTERNAL INTERNAL
CONTROL REMOTE
IN
OUT
PAL
SYSTEM TV AUTO NTSC
DIGITAL IN
COAXIAL
AUX
A/V EUROCONNECTOR TV OUTPUT VIDEO OUTPUT AUDIO S2 1 2 VIDEO
2
L 1
R
COAXIAL OPTICAL
OUTPUT DIGITAL
EXTERNAL INTERNAL
CONTROL REMOTE
IN
OUT
PAL
SYSTEM TV AUTO NTSC
L
R
1
AUDIO IN
L R
(white) (red)
(white) (red)