Marantz WB6001 - Manual (Page 3)

PRECAUTIONS
PRECAUTIONS
>
>
>
>
>
>
Always unplug the Plasma Display before attaching it to the Marantz
Plasma Wall Mount.
The Marantz Plasma Wall Mount is intended for mounting on flat surfaces such
as walls with wood studs, reinforced metal studs or solid-flat concrete. Always
use the appropriate hardware in sufficient quantities for each mounting surface.
Marantz will not assume any responsibility for damage resulting from the use of
improper mounting hardware.
The intended flat surface should be capable of supporting a weight of 4 times
the weight of the Plasma Display plus the weight of the mount (25 lbs.) and the
associated equipment. Reinforcement may be necessary to ensure this capability.
If you are in doubt, consult your with your Marantz Authorized Dealer or a
professional home theatre installation specialist.
Have the help of two people or more when you attempt to mount the Plasma
to the already
-mounted Marantz Plasma Mount Hardware. Plasma Displays
are heavy and difficult to handle for one person.
DO NOT subject the unit or supporting structure to shock, vibration, movement
or danger of impact which could result in damage to your Plasma Display or
personal injury.
DO NOT mount in direct sunlight, or near a heater, fireplace or air conditioner
which could result in damage to your Plasma Display or increase the risk of fire.
CAUTION! Failure to adhere to the precautions listed above may
result in damage to your Plasma Display or injury to your person.
3
>
50 mm (2")
m
m
(2
")
50
m
m
(2
")
Wall
Wall
50 mm (2")
50 mm (2")
Ventilation is Required . To allow heat to
disperse, leave space between surrounding
objects as shown on the diagram at right
when installing.