Dolby Laboratories LC-19SB25U - Manual (Page 24)

Adjust the antenna until
the level is 60 or higher
SIGNAL STRENGTH
CHANNEL STRENGTH
str
Press a/b to select “Antenna Setup Digital”,
and then press ENTER.
3
Channel Strength
24
Basic adjustment settings
Antenna Setup Digital
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confi rm the
antenna confi guration through the “Antenna Setup
DIGITAL” screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
Press ENTER.
When viewing ANALOG broadcasts:
1 Press c/d to select the channel to skip,
and then press b to move down.
2 Press c/d to select “On”, and then press
ENTER.
• On: Skips channels. (Channel selection disabled
using CH r/s.)
• Off: Does not skip channels. (Channel selection
enabled using CH r/s.)
When viewing DIGITAL broadcasts:
1 Press a/b to select the channel to skip,
and then press ENTER to select “ADD” or
“ERASE”.
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
Press a/b to select “CH Setup”, and then
press ENTER.
Press a/b to select “CH Memory”, and then
press ENTER.
Channel memory setting
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
1
2
3
4
5
Press a/b to select “CH Setup”, and then
press ENTER.
Press a/b to select “SIGNAL STRENGTH”.
• The signal strength of DIGITAL channel is
displayed. The signal information is based on the
current channel.
1
• Make sure what kind of connection is made with your TV.
Press MENU to exit.
6
• ERASE: Skips channels. (Channel selection
disabled using CH r/s.)
• ADD: Does not skip channels. (Channel selection
enabled using CH r/s.)
2
4
Press MENU to exit.
5
Press a/b to select “Antenna Setup Digital”,
and then press ENTER.
3
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
Press a/b to select “CH Setup”, and then
press ENTER.
Press a/b to select “CHANNEL STRENGTH”,
and then press ENTER.
• Input the 2 -digit channel number to check
the strength of the selected channel.
• Make sure the appropriate signal strength of each
channel received is obtained.
1
2
4
Press MENU to exit.
5
SIGNAL STRENGTH
CHANNEL STRENGTH
• This "SIGNAL STRENGTH" display is a standard to decide
the best direction of the antenna, and cannot to guarantee
image/voice.