Dolby Laboratories LC-19SB25U - Manual (Page 27)

27
Advanced picture settings
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
Color Temperature
For a better white balance, use color temperature
correction.
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
Monochrome
For viewing a video in monochrome.
Film Mode
Automatically detects a fi lm-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyzes it then recreates each still
fi lm frame for high-defi nition picture quality.
Basic adjustment settings
Selected item
High
Mid-High
Middle
Mid-Low
Low
Description
White with Bluish tone
White with Reddish tone
Selected item
On
Off
Description
For viewing in monochrome
Normal color
Selected item
On
Off
Description
Detects, analyzes, converts fi lm source
Normal viewing mode
I/P Setting
Adjusting the image and input signal can give you a
more beautiful picture.
Advanced setting enables you to set the picture
adjustment in more detail. There are four options you
can choose from.
C.M.S. (Color Management System)
Color tone is managed using the six-color adjustment
setting.
Press MENU and the MENU screen displays.
Press c/d to select “Picture”.
Press a/b to select a specific adjustment
item among “C.M.S.-Hue”, “C.M.S.-Saturation”
and “C.M.S.-Value”, and then press ENTER.
Press a/b to select “Advanced”, and then
press ENTER.
1
3
2
4
5 Press c/d to adjust the item to your desired
position.
• For resetting all adjustment items to factory preset values,
press a/b to select “Reset” , and then press ENTER.
Selected item
C.M.S-Hue
C.M.S-
Saturation
C.M.S-Value
Description
either more reddish or more bluish in tone.
Increases or decreases the saturation of a
A higher value makes the image brighter.
A lower value makes the image darker
Selected item Description
Standard Normal adjustment
Fast For movie image
Slow For still image
Off For Game Mode
C. M. S. – Hue
R
Y
G
C
B
M
Reset
[ 0]
[ 0]
[ 0]
[ 0]
–
–
–
[ 0] –
[ 0] –
+
– +
+
+
+
+
C. M. S. – Saturation
C. M. S. – Value
Color Temp.
3D - Y/C
Film Mode
I/P Setting
Monochrome
selected color
This is a standard to adjust the color
Press a/b to select “Advanced”, and then
press ENTER.
Press MENU to display the MENU screen, and
then press c/d to select “Picture”.
1
3
2
4
Press a/b to select “I/P Setting”, and then
press ENTER.
Press a/b to select “Fast” or “Slow”, and
then press ENTER.
Selected item
Fast
Slow
Description
Suitable for fast-moving images
Suitable for smooth images with low
amounts of fl ickers