MBM Corporation ES 8000 - Manual (Page 21)

User Manual ES8000
20
Functions
Count Setting
Operation
You can set the number of jobs to be done.
For example, if you set count on 100, machine will stop operating when the job
reaches 100. Press Start/Stop button again, machine will start to finish another 100.
1. Press Count button and the LED will light on
2. Select job volume by using - / + button.
* If you press the button on by one, count will change by 1 and if you press
for more than one second, the count will change by 10/second.
3. Press Set button and check the number displayed on the panel.
* You can set the counter up to 250 sheets.
Use of “Auto Start” Function
In case you need job separation, you do not have to press Start button again.
1. Press the button. Then ‘Time Interval’ will be displayed on the panel. Select
the desired
delay time by second with - / + button.
2. Press Set/Store button.
3. Max. 10 seconds of delay time can be set.
Reference
For example, in case count set to 10 and Auto Start time interval set to 3 seconds,
after 10 products, machine will stop for 3 seconds. LED will blink. 3 seconds later,
it will work again.
If you switched off the power and on, you have to set the function again.