MBM Corporation ES 8000 - Manual (Page 3)

User Manual ES8000
2
Introduction
Welcome!
Thank you very much for selecting a Paitec USA product!
Introduction
This manual is prepared to provide you with guidelines on how to properly operate and
maintain the ES8000. Please read this user manual before operating in order to
prevent unexpected malfunction or damage. Please refer to the manual carefully and
follow the instruction.
Copyright 2014
Any of the contents should not be copied, re-printed or translated by other languages
without Paitec USA approval.
Safety Precautions
Caution: Serious bodily injury or mechanical damage may result from
insufficient attention to or incorrect compliance with warning
messages using this symbol.
● Do not attempt to disassemble or reorganize the machine. It may cause an electric
shock or mechanical problem.
● Quickly disconnect the power if liquid or a foreign object enter the inside of the
machine.
● Do not enter metal or inflammable material into AC Inlet.
● Please contact local dealer when you relocate the machine.
● This manual is subject to be revised without notice for product improvement.
● Do not install the machine on the place as below.
- Near window or places exposed to direct sunlight.
- Where vibration is detected.
- Sudden temperature changes or poorly ventilated areas.
- Places exposed to hot or cold air directly. (not office circumstance)
- Not solid enough or weak floor.