Loading the paper hopper, Too much gap, Good – MBM Corporation ES 2000 User Manual
Page 11
Advertising
Loading the Paper Hopper
- 11 -
It is important that you load the paper hopper correctly to minimize the risk of paper jams
occurring.
Fan the pressure seal forms to separate and to eliminate any static that may have been
caused by the laser printer.
Too much gap!
Adjusting the hopper paper guides to the correct location
Good
Paper Guide Tension
Insure that the side guides are
right up against the edge of the
form but not compressing the
form
Please note.
The hopper will take up to 150
printed forms. However please do
not overload the hopper. This will
result in miss-feeding
Advertising