MBM Corporation ES 2000 - Manual (Page 13)

- 13 -
Operator Maintenance
안전 테이프 및 보호 스티로폼 제거하기
기기를 작동하기 전에 모든 안전 테이프와 보호 스티로폼을 제거 하십시요. 안전 테이프 및 보호 스티로폼 제거하기
기기를 작동하기 전에 모든 안전 테이프와 보호 스티로폼을 제거 하십시요.
Since pressure seal forms leave paper dust as well as ink and
toner residues, it is very important to occasionally clean the
surface of the each roller to ensure optimum performance.
1. Paper Dust
Use small air cleaner or dust remover
2. Pick-up and Fold rollers
Clean the feed roller as well as the aluminum and rubber
rollers inside the folding unit with roller cleaning fluid. Do not
use oil as this will damage the surface of the rubber.
3. Sealing Rollers
With general use, toner will build up on the pressure rollers.
Check the rollers for build up of toner and clean on a regular
basis using a suitable roller cleaning fluid. The degree of build
up will vary according to the type of printer, toner & fuser used.
Caution : Do not use any other substance to clean the
surface of the fold rollers as it may damage the rubber.
Please contact your service tech for further details on
suitable cleaning solutions to be used.