Specifications – Mega Catch MCA-600 Alpha User Manual

Page 3

Advertising
background image

The Mega-Catch™ ALPHA Mosquito Trap can be used
indoors or outdoors.

Place your ALPHA Trap on a flat surface approximately
2 to 3 feet (0.75 - 1metre) above floor or ground level.

Alternatively, install a metal ring (keyring loop) through
the hole on the lid, and hang or suspend the trap so
it is approximately 2 to 3 feet (0.75 - 1metre) above
floor or ground level.

Place the trap in a shaded area, protected from strong
wind. Place the trap as far away from people and as
close to the mosquito source as possible.

If severe weather conditions are predicted then store the Trap out of the weather.

Mega-

Ca

tch

ALPHA

Trap Siting

Features of Mega-Catch™ ALPHA Mosquito Trap

The Mega-Catch™ ALPHA Mosquito Trap has been designed for indoor or outdoor use (NOTE: when
operating the ALPHA Trap indoors, remove the Mega-Catch Octenol Fragrance Strip).

The ALPHA can operate unattended for long periods. It features an electronically controlled LED
lighting system that produces intermittent light at oscillating frequencies selected to coincide with
spectral sensitivity peaks for many mosquito species.

Mosquitoes attracted to the ALPHA by visual and other cues enter the Trap where they are collected
in the Catch Bag.

Specifications

Power Source

AC/DC Adaptor

Registration No. 28883 Pest Control Products Act

UL Listing

48ST E198424

U.S. Patents Pending

Input

120V AC 60HZ 30W

U.S. Trade Mark Reg. No: 2,679,688

Output

12V DC1.2A

CAN Trade Mark Reg. No: TMA623.018

Mega-Catch™ is a trademark of Envirosafe Technologies NZ Ltd.

MADE IN CHINA for:
Envirosafe Technologies NZ Limited
Unit 10, 6 Omega St, Albany
Auckland, New Zealand
[email protected] www.megacatch.com

Advertising