Measurement Computing CB-7080 - Manual (Page 26)

CB-7080 & CB-7080D Counter/Timer User's Guide ~AAO(name)
2-8
~AAO(name)
Description : Sets the module name.
Syntax : ~AAO(name)[chk](cr)
~ A delimiter character
AA 2-character HEX module address, from 00 to FF
(name) 4-character/5-character module name
[chk] 2-character checksum. If checksum is disabled, no [chk]
(cr) 0x0D
Response :
Valid response !AA[chk](cr)
invalid response ?AA[chk](cr)
No response Syntax error, communication error or address error
! A delimiter character indicating a valid response
? A delimiter character indicating an invalid response
AA 2-character HEX module address
[chk] 2-character checksum. If checksum is disabled, no [chk].
(cr) 0x0D
Examples :
Change module name from 7080 to 8080
command: $01M(cr)
response: !017080(cr)
command: ~01O8080(cr)
response: !01(cr)
Change module name from 7080D to 8080D
command: $01M(cr)
response: !017080D(cr)
command: ~01O8080D(cr)
response: !01(cr)
Note
This command was designed for OEM/ODM users. You can use it to change the module name for other
purposes.