Measurement Computing E-1608 - Manual (Page 25)

E-1608 User's Guide Specifications
25
Power
Table 15. Power specifications
Parameter Condition Specification
External power supply 5V, 1A
Supply current Quiescent current 330 mA typical (Note 6)
710 mA max including all external loading
User output voltage range Available at +VO terminal 4.40 V min to 5.25 V max, assumes supplied
AC adapter is used
User output current Available at +VO terminal 10 mA max
Note 6: This is the total quiescent current requirement for the device that includes the LEDs. This does not
include any potential loading of the digital I/O bits, +VO terminal, or the AOUTx outputs.
Network
Ethernet connection
Table 16. Ethernet connection specifications
Parameter Specification
Ethernet type
100 Base-TX
10 Base-T
Communication rates 10/100 Mbps, auto-negotiated
Connector RJ-45, 8 position
Cable length 100 meters max
Additional parameters HP Auto-MDIX support
Network interface
Table 17. Factory default specifications
Parameter Specification
Protocols used TCP/IP (IPv4 only), UDP
Network ports used
UDP:54211 (discovery)
UDP:6234 (bootloader only)
TCP:54211 (commands)
TCP:54212 (scan data)
Network IP configuration DHCP + link-local, DHCP, static, link-local
Network name E-1608-xxxxxx, where xxxxxx are the lower 6 digits of the device MAC address
Network name publication
By NBNS (responds to b-node broadcasts, therefore only available on the local
subnet)