MEGAPOWER MVP-732 - Manual (Page 2)

Chapter 1
Introduction
1.1 About Your Digital Presenter
The MVP-732 Digital Presenter is a convenient, versatile, state-of-the-art
presentation system. It is an effective and valuable tool for presenting printed material,
slides or 3-D objects on a digital display such as plasma monitor or LCD monitor TV etc.
or through a multimedia projector onto a large screen. The digital output from the presenter
delivers crystal sharp, color rich and extremely stable image. The enlarged display
allows large groups to simultaneously view the object clearly and lively, and is
particularly well suited for business meetings, conferences and group instruction.
The following lists some of the specific features of the MVP-732 Digital Presenter:-
- Format Compatible: JPEG Photo, MP3 Music, Divx, Xvid, VCD and DVD video Playback
- The 16 times optical motorized zoom together with automatic focusing keeps the
displayed object always clearly in focus.
- High sensitivity and low illumination.
- Goose Neck Upper lighting units for even and bright illumination.
- Perfect Positive/Negative function gives very good color reproduction for negatives.
- Image Storage Function (Image Freeze) allows for display of image while changing the
displayed object. This is an indispensable feature for professional presentations.
- Stores 8 picture images.
- 90 degrees image rotation plus scrolling.
- Vertical or Horizontal image flip.
- USB for image downloading.
- The Digital Presenter has a RS-232C connector and driver for PC remote control under
Microsoft Windows environment.
1.2 Safety Information
Please read these instructions before using your Digital Presenter. Failure to comply with
these instructions could result in electric shock, fire, personal injury or damage to your
Digital Presenter.
Power Source
Check the power specification plate on the back of the Digital Presenter. Ensure that your
line voltage matches with the rating of the Digital Presenter. The Digital Presenter accepts
AC power 100-240V, 50-60 Hz, three-wired type grounded sources. Operate the Digital
Presenter only from a three-wired grounding type power source.
1 14
Chapter 5
Troubleshooting Guide
If you are having a problem operating the Digital Presenter, firstr make sure you have set
it up according to the instruction in Chapter 3. You should also check the adjustments and
the INPUT connections. Verify that all power is switched on. Before calling for service,
check the troubleshooting suggestions in this chapter.
Problem Solutions
No image on the Monitor Check VGA cable connections. Check INPUT source
selection is correct.
Remote Control does not function Check that there are no obdyscles between the remote
control and the Digital Presenter.
Check the batteries in the remote control.
The Focus cannot be controlled Control the focus manually.
Automatically
There is no sound Check that the Audio cable is properly connected to the
PC IN port on the rear panel.
Check the speaker.
The lights cannot be switched on Checkthat the AC power cord is plugged into the wall
socket.
Check that the light bulb is not damaged.
There is no suoud from the Check that the microphone is properly connected to
microphone the Microphone Port on the rear panel.
Check to ensure that the Microphone is functioning
properly.