Meinberg GPS170LCD-MP - Manual (Page 34)

34
FORCE BOOT MODE
This menu lets the user force the receiver into the Boot Mode. This may be necessary
when the satellite datas in the memory are too old or the receiver position has changed
by some hundred kilometers since last operation. Syncronisation time may be reduced
significant. If there is valid satellite data in the memory the system starts in the
WARM BOOT mode, otherwise the system changes into COLD BOOT to read new
data.
SETUP: FORCE BOOT MODE
Are you sure ? Press ...
INC => YES MENU => NO
ANTENNA CABLE
This menu asks the user to enter the length of the antenna cable. The received time
frame is delayed by approx. 5ns per meter antenna cable. The receiver is able to
compensate this delay if the exact cable length is given. The default value is 20m. The
maximum value that can be entered is 500m (only with low loss cable).
SETUP: ANTENNA CABLE
SETUP: ANTENNA CABLE
LENGTH: 0020 m