Meinberg UA32S - Manual (Page 10)

10
Default Configuration
Unless the customer has defined his own set of parameters, the radio clock UA32S is
beeing shipped with default parameters:
Serial Port: 9600 baud, 7E2, time string per second
Optocoupler 1: one pulse per second
2: one pulse per 10 seconds
3: one pulse per minutes
4: onc pulse per 3 minutes
Relay1: one pulse per 15 minutes
2: one pulse per hour
3: one pulse per day (00:00:00)
All of the output pulses have a width of 0.1 sec. No switching times are programmed.