Meinberg UA32S - Manual (Page 7)

7
UA32S Overview
The hardware of UA32S is a 100mm x 160mm microprocessor board. The 20mm wide
front panel contains three LED indicators ,only the100,8mm wide front panal contains
an 7-digit LED display and a time/date switch. An asynchronous serial port is available
which can be used to read out information on date, time, and status. The Meinberg
standard time string can be sent automatically whenever a new second begins (default)
and/or the host has sent a request character. Four optocoupler outputs and 3 relay outputs
are available which can be used to switch external components or generate periodic
pulses. The outputs can be programmed using data tables residing at specified addresses
in the on-board EPROM.
4HP 20HP
Frontview UA32S