Metz Mecablitz 45 CL-4 - Manual (Page 50)

50
k
Recycling time:
7 sec. (in M mode)...0.3 with NiCad battery
13 sec. (in M mode)...0.3 sec. with alkaline-manganese batteries
11 sec. (in M mode)...0.3 sec. with high-capacity alkaline-manganese batteries
Swivelling range and locking positions of zoom reflector:
Upwards: 15° 30° 45° 60° 75° 90°
Anti-clockwise 90° 180°
Clockwise 90° 180°
Dimensions (w x h x d), approx.
Flashgun 92 x 247 x 102 mm
Weight:
Flashgun without power sources:
approx. 680 g
Table 1: Guide numbers at maximum light output (Pag. 76)
Table 2: Chargers (Pag. 76)
Table3: Distances in TTL flash mode (Pag. 77)
3. . . 16 Distance range without wide-angle diffuser
2. . . 11 Distance range with wide-angle diffuser
These zable does not apply to bounced flash.
Included:
Flashgun, camera bracket, battery housing 45-39 (only with BAT-version,
otherwise optional extra), synch cable 45-47, wide-angle diffuser 45-42,
light reducing filter 45-44, Operating Instructions, SCA 300/3002 Table,
(additionally with NiCad flashguns: NiCad battery pack 45-40 and battery
charger, see table 2, page 76).
14. Optional accessories
Malfunctions and damage caused to the mecablitz due to the use of
accessories from other manufacturers are not covered by our guaran-
tee!
• Adapter of the System SCA 300.
For flash with system cameras (see separate operating instructions). The
SCA 300 A connecting cable is additionally required.
• Adapter of the System SCA 3002
For flash with system cameras with digital data transmission of the SCA
function. Extended functional features compared with the SCA 300 System
(see separate Operating Instructions). The SCA 3000 C connecting cable is
additionally required.
• Bag 45-29 (Order No: 0004529)
for telephoto attachment 45-33.
• Battery holder 45-39
For alkaline manganese batteries.
• Battery charger set B 45 (Order No: 0012045)
NiCad battery and charger for subsequent conversion of the 45 CL-4
Battery model to NiCad battery operation.
• Bounce diffuser 60-33 (Order No: 0006033)
To soften heavy shadows with reflected light.
• Bracket adapter 45-35 (Order No: 004535)
For parallax correction of reflector and camera with close-ups and wide-
angle shots.
• Bracket adapter 60-28 (Order No: 0006028)
Similar to 45-35, except adjustable in height.
• Camera bracket 70-35 (Order No: 0007035)
To attach the flashgun to the side of the camera.
• Camera cable release 45-26 (Order No: 0004526)
The camera shutter can be tripped with the same hand that is holding the
flashgun. This frees the other hand for focusing.
☞
703 47 0149-A3 45CL-4 14.03.2006 10:08 Uhr Seite 50