MicroLinks UM12 - user guide - Manual (Page 7)

5
(2) LED Adjustment:
Preview image in higher magnification requires higher
luminance, on the contrary, lower magnification requires less
luminance. It’s suggested to set the “Auto Exposure” as
“Manual” in the software.
( ○
i
) Increase luminance. ( ○
j
) Decrease luminance. ( ○
k
) LED
Light. (○ k ) LEDs for Lower working distance. (LED x 4), (
○
l )
LEDs for middle height working distance. (L ED x 2), (
○
m ) LEDs
for higher working distance (LED x 2). LEDs options will change
automatically.
(3) USB port
USB port (
○
n ) supply power to microscope and PC connection
to preview image.
(4) Stand hole ( ○
O ) to fix microscope.
1.4 Microscope focus
There are two ways to focus. First, choose focus distance to
adjust the microscope height, then zoom in/out on the software
or microscope until clear. Second, first to choose the image
sensor position then adjusts the microscope height. Distance:
distance from lens to object. Sensor position: Image sensor
position.