MicroLinks UM03 - user manual - Manual (Page 31)

MICROSCOPE Application Program http://www.ViTiny.com
31
Copyright © 2008-2012 MicroLinks Technology Corp.
5. Mode Function
When connect with MICROSCOPE AP, below the left window will show scene toolbar. See
Fig 5-1.
Fig. 5-1 mode function toolbar
5.1 Video Control and rotation mode
This toolbar has the functions to flip video image. The image will presented upside down as well
as the image moving direction when holding by different hand. By the mode, it can preview the
correct direction. The brightness, contrast and exposure tool can be adjusted and also can cause
the video image to be clearer in different scene. Fig.5-2 is the selection video control mode.
Fig.5-22 is the toolbar of video control mode.
Fig 5-2 Video control and rotation mode toolbar
5.1.1 No Flip「 」 ：Video image’s flip direction, does not makes any flip shown in Fig 5-3.
Fig 5-3 Video image with no flip
5.1.2 Vertical Flip「 」 ：The video image upside down 180 degree, which is vertical flip, shown in
Fig. 5-4.
Fig. 5-4 Video image do vertical flip
5.1.3 Horizontal Flip「 」：The video image left and right mirror 180 degree flip which is