Microsens ATEX SFP-Transceiver User Manual
Overview, Warning, Components of the product
MICROSENS GmbH & Co. KG - Kueferstr. 16 - D-59067 Hamm / Germany - Tel. +49 (0)2381/9452-0 - Fax -100 -
www.microsens.com
Overview
The actual SFP transceivers from MICROSENS offer an optical transmission over multimode or
single mode fiber. Depending on the model the transceiver can cover distances up to 120 km.
The optical transceivers from MICROSENS comply with the SFP specifications Revision 5.4.
Additional they are compliant to the Gigabit Ethernet specifications according IEEE Std. 802.3®,
the Fibre Channel specifications FC-PH, PH2, PH3, FC-PI 10.0 and all common ATM (OC-12, OC-48)
and Sonet (SDH STM-4, SDH STM-16) standards.
The transceivers are available with different wavelengths. For multimode applications such as
Gigabit Ethernet, Fibre Channel or Double Rate Fibre Channel VCSEL lasers with a wavelength of
850 nm are used. This allows to realise distances up to 550 m using a 50/125µm multimode fiber.
For single mode applications there are FP and DFB lasers with the wavelengths of 1310 nm and
1550 nm available. Depending on the model it is possible to cover distances from 10 km up
to 120 km.
The transceivers offer the highest flexibility and can be installed during operation (hot swap).
Warning
The ATEX-SFP Transceiver is not certified for usage in potentially explosive atmospheres.
These fiber links can lead to ATEX “Zone 0” directly.
Please check following standards:
EN 60079-0/2009
EN 60079-28/2007
Components of the product
•
SFP Transceiver
•
Installation- and operation manual
Please check that the delivered transceiver is undamaged. If the transceiver is damaged or some
parts are missing, please contact MICROSENS for assistance.
Technical Data of SFP Transceiver
Relevant parameters of LC SFP-Transceivers:
electrical:
nominal voltage (
U
N
) :
3,3 ±5%
V DC
nominal current (
I
N
):
300
mA
optical:
optical output power (
P
opt
):
< 30
mW
wavelength (
λ
)
830 – 860
nm
surrounding temperature(
T
a
)
-40 °C to +85 °C
storage temperature (
T
s
)
-40 °C to +80 °C
ATEX SFP Transceiver
Installation and
Operation Guide