MK Products Prince XL - Manual (Page 16)

Prince ® XL/Spool Gun Owner's Manual - Page 9
Gas Valve Removal Tool
Gas valve removal is performed by using P/N 931-0105 Gas Valve Removal
Tool. This multifunctional tool has been slotted on one side to encompass
and conform to the gas valve stem and seat into the slotted gas valve body
as seen in Figures 1 and 2. Removal of the gas valve can be accomplished
by turning the gas valve tool counter clockwise. Reinstall by turning clock-
wise. The tool doubles as a bottle opener.
Prince XL Spool Gun Controls
WC-1
P/N 001-3062
The WC-1 is desinged to hookup to any CV or CC
power supply having its own contactor. CC Posa
Start “run-in speed” is included as a standard feature.
The control operates on 115VAC, 50-60hz power.
For machines such as gas drives that do not have contactors, the MK200
Contactor Box (P/N 001-3066) must be used.
MK200 Contactor Box
P/N 001-3066
PA-L1 Spool Gun Control - Lincoln
P/N 005-0676
Connects directly to Lincoln Electric power supplies
(42V system) with 14-Pin (X-clocked) amphenol
connectors, such as:
CV 250 CV 300 CV 400
CV 655 DC 400 DC 600
DC 655 V350-Pro (factory model) Ranger 250
Range 275 Ranger 305G
PA-M1 Spool Gun Control - Miller
P/N 005-0261
Connects directly to Miller power supplies (24V system)
that are classified with 14-Pin amphenols as type 6 or 9
and to Thermal Arc units, such as:
MILLER SUPPLIES ThERMAL ARc
Millermatic 200 Deltaweld’s Thermal Arc 300GMS CC/CV
Shopmaster CP Series Fabricator 210, 250, 300 LF
XMT’s & Maxtron Trailblazer 250, 251
Regency’s
Any Gas-drive that has a CV tap and contactor installed with a 14 pin amphenol.
PA-G1 Spool Gun Control - Generic
P/N 005-0264
This Generic Torpedo is designed to hook-up to CV
power supplies that supply an auxiliary 26 VAC @ 1.7
amps and uses a closing contact signal. The unit is
supplied with bare wires that must be connected to the
power supply. Some examples of power supplies that can be hooked-up are:
Lincoln SP-250, 255 & Wirematic 250 & 255
Beta-Mig 200 & Beta-Mig LF
Airco Dip-Pak 200, 225 & 250
MK200 Contactor Box
Spool Gun Control - Lincoln
Spool Gun Control - Miller
Spool Gun Control - Generic
WC-1
Figure 1 Gas Valve Removal Tool Figure 2