Mogar Music 3DENHANCER - Manual (Page 5)

1. INTRODUCTION
In purchasing the XXL 3D Enhancer, you have acquired a professional Enhancement
System of the high-end class
, which meets all the demands and requirements of studio
and live works. The sound precision and flexibility of the functions are the main
outstanding features of this high-end unit. The 3D ENHANCER is our state-of-the-art
sound enhancement system offering a special combination of sound improvement
designs. The unit can be used wherever professional sound improvement is required.
The XXL 3D ENHANCER is the no-compromise answer when the situation demands a
no-compromise solution.
1.1 High Technology
Our experience in the field of professional studios drove us to design the 3D
ENHANCER, an incredible small size Stereo Enhancer that is able to give answer to all
the demands in Studio, Live, broadcast and TV applications. All the electronics is
assembled directly on PCB with no wires use, it means less possibility of malfunction.
All the internal IC are 4580, ultra High quality Operational Amplifier that allow high
current output with very low noise threshold. All the output
s are protected in order to
guarantee safe operating conditions in every situation. All the inputs are balanced
(except RCAs), in this way you can have the best matching conditions with the other
machines. The choice of having the external power supply ensure professional features
with minimum noise, and allow you to drive the unit also with an external optional
battery pack to use the unit also without the presence of main AC power.
1. THE DESIGN
2.1 The INPUT LEVEL control
The INPUT LEVEL potentiometer allows set ting the proper level of input signal in
order to not overdrive the internal stages of the unit. Verify on the VU meter set to
“INPUT” that the level is correct (around 0 dB) otherwise adjust the level using the
INPUT LEVEL potentiometer. If your signal is far from the level you desire (too high or
too low), verify the source signal amplitude and the correct setting of SENSITIVITY
switches on the back of the unit.
2.2 The BASS PROCESSOR control
The BASS PROCESSOR control determines the amount of signal used for sound
enhancement (from Off to Max). Turn the control clockwise for a more strong and
punchy bass sound. The setting depends on the application you are addressing.
Attention! Please note that the Bass Processor should be carefully set to avoid
possible speaker damage. Most near-field monitors could not be capable of handling
the bass produced by the 3D Enhancer.
5 – 3D ENHANCER USER’S MANUAL