Mogar Music 3DENHANCER - Manual (Page 6)

2.3 The FAT BURNER switch.
The FAT BURNER switch allows insert ing in your audio chain a powerful processor, which
is able to cut out, in a very smooth way, the bottom lower frequencies, which in the same
application, especially when you are using in an hard way the BASS PROCESSOR
and the PUNCH controls off the 3D Enhancer, would be able to overdrive your system
or to destroy your monitors.
2.4 The PUNCH cont rol
The PUNCH control allows to create an incredible punchy sound, for every kind of
music and situation. It is able to give your music more bass presence, also if the original
bass frequencies are very poor.
Attention! Please note that the PUNCH control should be set carefully to avoid possible
speaker damage. Most near-field monitors could not be capable of handling the bass
produced by the 3D Enhancer.
1.5 The HIGH SHAPE control
The HIGH SHAPE control sets the cut-off frequency of the high pass filter. Using this
control you can select the frequencies that are routed to the 3 D Enhancer High
Frequency Processor.
1.6 The HIGH ENHANCER control
The HIGH ENHANCER control of the high band determines the amount of signal used
for sound enhancement (from Off to Max). It would depend on the application as to
whether a high-quality system is to be given same more high transparency, or whether
maximum intelligibility is to be achieved in a relatively poor sound reinforcement system.
1.7 The METER MODE switch
The METER MODE switch allows to select the pick-up point of the signal sent to the VU
meter from the Input Stage to the Output Stage. Because of this reason you can check
carefully the Input and Output level of your signal and you can be sure that no
overloads
occurred during the process.
1.8 The 3D PROCESSOR
The 3D PROCESSOR is the heart of the 3D Enhancer, it features a knob control that
allow to chose the amount of desired process and a switch that inserts or bypasses the
3D PROCESSOR. Turning clockwise the knob control you can fill, with almost all kind of
stereo mixed source, an incredible improvement of the intensity of the stereo effect and
the enlargement of the stereo basis dependent on the program content. Therefore, this
function can only be used in conjunction with stereo program material.
6 – 3D ENHANCER USER’S MANUAL