Monster FlatScreen SuperThin Flat Mount - Up to 46” Screens - Manual (Page 20)

16
ENGLISH
Attaching Extension Adapters to Extend
VESA
™
Pattern to 400x400
NOTE: Each adapter includes two threaded studs
and nuts. No additional hardware is required to attach
the adapter to the mount.
To attach the adapter to the ends of Tilting V-Bars, 1)
place the adapter in front of the Tilting V-Bar.
The adapter should be attached at the uppermost
slot at the top of each vertical adjustment bar
and the lowest two holes in the bottom of each
Tilting V-Bar.
Using a ½" (13mm) wrench, attach the adapter 2)
by tightening the two nuts through the back
of the Tilting V-Bar.
Using a Phillips head screwdriver, affix the adapter’s 3)
head cap screws to the back of your TV